Atlas Engineering

Your quest for matchless quality Hot Mix Asphalt Plant at Atlas Engineering. We furnish good quality mini asphalt drum mix plant that is manufactured from excellent quality raw materials that mark them highly reliable and dependable. Our drum mix plant is known for effectual performance and easy operation. These drum plants are available in varied production capacities and can even be customized as per requirements of honored customers. We ensure easy accessibility and are recognized as one of the chief drum mix plant manufacturers from India.

• Endless belt feeder
• Shaft-mounted gear motor for minimum maintenance
• Individual-frequency control with variable feeding of material monitored and controlled remotely from the control cabin
• Speed vibrator motor is operated by a no-flow switch to ensure continuous material flow for the sands the bin
• Working platform along hoppers

Dryer Drum

• The drum is fitted with a single piece, a hot-formed ring without welded joint (drum tire) on each end, mounted to the drum shell with spring plates
• Each drum tire is seated and rolled on two Trunnion rollers
• Feeding end of the inclined drum is further guided by 2 guide rollers to limit the axial movement
• Special shovel flights are installed to the internal surface along the drum length to transport and form efficient drying curtain to minimize fuel consumption
• Special vacuum drum pressure device is fitted to control rotary actuator at the exhaust fan to regulate the air flow
• Hot mineral bins and screens are dust-tight enclosed

Burner C/W Blower

• Fuel piping system, transfer pump and high-pressure pump are included
• Automatic controls for the burner are included to regulate the capacity based on the temperature monitor by a sensor at the drum exhaust gas outlet
• Fully automatic, electrical ignition by propane gas
• A flame-failure indication that is detected by photocell
• Auto start-up of burner system for maximum safety
• Fuel Pump and Accessories include
• Fuel pump (placed next to the Fuel tank and at ground level)
• Piping to the main burner is inclusive of valve and strainer. Pressure-holding valve ensures the line pressure of fuel reaches high-pressure pump of the burner.
• From outlet of pressure holding valve, a long flexible hose is connected to the inlet filter of the main burner. Flexible hose ensures fast attachment. Inlet filter is mounted

Hot Mineral Bins

• Each compartment is equipped with mechanical overflow chute and sampling pods
• Mineral temperature sensors are located inside the sand compartment
• Oversize material will flow out via overflow chute to a collection point
• Each compartment is equipped with a pneumatically actuated two-stage discharge gates controlled by the computer system.
• Each compartment has a maximum level indicator that is wired remotely to the control room to warn the operator when bins are full

Aggregate Weigher

• Designed to weigh up to 4 different aggregates
• Weigher is fitted with a proper shockproof device to prevent the transmission of vibrations to the load cells
• Discharge of the weigher is through two discharge gates that operated pneumatically.

Filler Weigher

• Designed to weigh up to 3 different sources
• Sealed with neoprene, which is heat resistant in the temperature range of -40 to 150 degree C
• Butterfly valves c/w high torque pneumatic actuator, solenoid valves micro switches

Bitumen Weigher

• Designed to weigh up to 3 different sources
• Bitumen is circulated from the storage tank through 2-way valve, actuated by compressed air
• Weigher tank is insulated with Rockwool slabs and heated at the base by thermal oil
• Weigher is provided with overfilling protection
• Mechanical dial thermometer indicates the bitumen temperature in the tank
• Gravity discharge to bitumen spray pipe

Twin-Shaft Pugmill Mixer

• Direct gear-motor drive with transmission through the synchronous, helical spur gear
• Robust and rugged design to suit hardest site condition.